Carrier 42VMC---N Installation Manual

Contents

Carrier 42VMC---N Installation Manual Manual pdf 9 page image

42VMC---NGB - 8Installation: 42VMC 028N - 036N - 048N Bracket screws Anchor screwsCeiling installation(42VMC 028N - 048N)Preparation• The piping connecting the indoor and outdoor units can berouted in one of two directions, as shown in figure.• If the piping is routed horizontally (direction no. ), the pipecover at the bottom of the air conditioner must be removed.• If the piping is routed vertically (direction no. ), a water pumpmust be installed for drainage (supplied separately, by request).Minimum 100 mmInstallation• To assemble the ceiling bracket, use the 4 mounting strips andthe 8 UNC-10 screws and nuts, as shown in figure.• Fasten the ceiling bracket to the ceiling using the 6 anchorscrews, as shown in figure.• The location of the ceiling bracket should allow a minimum gapbetween the indoor unit and nearby walls, as shown on page 2.Note:The anchor screws provided are intended for use with concreteceilings.Use fasteners which are appropriate for the type of ceilingpresent at the installation site.• Use the template supplied, and drill the 6 fixing holes in the wall.Use the 6 dowels provided.Outdoor SensorCableRefrigerantLinesElectricalCableDrainageTubeFA NM O D E90028509 1042Ø 80513510453555533165210360141Template mod. 028N - 048N Frame Outdoor air intake Hole for refrigerant pipe