Carrier 42XQA Owner's Manual

Also see for 42XQ Series: Owner's manual Installation and start-up instructions

Contents

Customization and(Button G and F)If you want to save a customized operatingmode which you can reactive at any time,complete the following steps:1. With the remote control connected ordisconnected, press button and keep itpressed down for more than 5 seconds.The customization icon starts flashingon the display.2. Press button M to select the operatingmode.3. Press button ∧ and ∨ to select the desiredtemperature.4. Use button to select the fan speed.5. Use button to select the deflectors’position.6. After entering all the selected options,press button to save them.NOTEAfter this procedure, all of theselected and saved functions will beable to be activated using button ,regardless of the operating mode ofthe unit.After entering customized mode, press one ofthe buttons: M, , ∧ , ∨ or to exit. If youwant to change one or more saved settings,return to point 1 and restart the settingprocedure.Daily timer(DAILY - button J)Press button when timer ON or OFF isactive. The icon appears on the display. Inthis way, the saving of the timer ON and OFFis repeated daily. To deactivate the dailyfunction, press button again.Combining the TIMER ON, OFF andDAILY programmingIf you want the unit to start operating at5:30pm and stop operating at 10:30pm,proceed as follows:1. Select timer ON for 5:30pm2. Select timer OFF for 10:30pm3. Select the desired operating mode(button M )If you want to stop the unit at 10:30pm andrestart at 7:30am with the same operatingmode, proceed as follows:1. Select timer OFF for 10:30pm duringoperation2. Select timer ON for 7:30am.14