Carrier 50SD030 Installation Instructions Manual

Also see for 50SD024: Operating and maintenance manual Install and operation instructions

Contents

6xy1 234 C00071DETAIL AA05161CORNER WEIGHTS (SMALL CABINET) CORNER WEIGHTS (LARGE CABINET)Unit 024 030 Unit 036 042 048 060Total Weight 343 366 Total Weight 433 460 480 492Corner Weight 1 69 74 Corner Weight 1 87 93 97 99Corner Weight 2 53 57 Corner Weight 2 68 72 74 76Corner Weight 3 83 88 Corner Weight 3 104 111 116 119Corner Weight 4 138 147 Corner Weight 4 174 184 193 198Rigging Weight 353 376 Rigging Weight 443 470 490 502Fig. 5 -- 50SD Unit Corner Weights (in Pounds) and Suggested RiggingABCMAXIMUM ALLOWABLEDIFFERENCE (in.)A-B B-C A-C1/4 1/4 1/4C99065Fig. 6 -- Unit Leveling TolerancesOPTIONALRETURNAIROPENINGOPTIONALSUPPLYAIROPENINGEVAP. COIL COND. COIL2"C99096Fig. 7 -- Slab Mounting DetailUNIT FALLING HAZARDFailure to follow this warning could result in personal injuryor death.Never stand beneath rigged units or lift over people.! WARNINGINSTALLATIONThe lifting/rigging bracket is engineered and designed to beinstalled only on Small Packaged Products. This bracket is to beused to rig/lift a Small Packaged Product onto roofs or otherelevated structures.PROPERTY DAMAGE HAZARDFailure to follow this warning could result in personalinjury/death or property damage.Rigging brackets for one unit use only. When removing aunit at the end of its useful life, use a new set of brackets.! WARNINGUSE OF RIGGING BRACKETField Installation of Rigging Bracket1. If applicable, remove unit from shipping carton. Leave topshipping skid on the unit for use as a spreader bar to preventthe rigging straps from damaging the unit. If the skid is notavailable, use a spreader bar of sufficient length to protect theunit from damage.2. Remove 4 screws in unit corner posts.50SD50SD