Carrier 52SE Installation, Operating And Maintenance Instructions

Contents

52SSERIES2GENERALThese installation instructions provide easy-to-understand information for installing, operating, andmaintaining these packaged air conditioners and heatpumps. The following models are covered in this book:52SC Cooling only . . . . . . . . . . . . . . . . . . . . . . . . . 60 Hz52SE Cooling with electric heat . . . . . . . . . . . . . . 60 Hz52SQ Cooling, electric heat, and heat pump . . . . 60 HzAll models are designed for through-the-wall instal-lation. Separate installation instructions are includedwith all accessory components.UNIT INSPECTIONExamine unit for damage incurred during shipment.File a claim immediately with the transit company ifdamage is found.The data information plate (Figure 1) lists the modelnumber, voltage ranges, and other important electricalinformation about this product. Reading and under-standing this material is important for proper use ofthis unit. To access the information plate, the frontpanel must be removed; see Figure 2.To remove the front panel:1. Grasp panel firmly near top of both sides.2. Pull panel up then forward.Using Figures 1 and 3 as reference, verify that thepackaged terminal product ordered will operate prop-erly in your facility. If you do not understand the in-formation given or have questions about the product,please call your local dealer or distributor.IMPORTANT: The front panel has to be off the unitto complete future checks and installation proce-dures. Do not reinstall front panel at this time.FIGURE 1 — SAMPLE DATAINFORMATION PLATEFIGURE 2 — REMOVING FRONT PANEL