Carrier 58UHV Installation, Start-up, And Operating Instructions Manual

Also see for 58UHV Series: Installation, start-up, and operating instructions User's information manual Installation, start-up, and operating instructions Installation, start-up, and operating instructions

Contents

Carrier 58UHV Installation, Start-up, And Operating Instructions Manual Manual pdf 21 page image

d. Close thermostat switch as if making normal furnace start.If the hot surface ignitor does not glow within severalminutes and control flashes code 32, then the flow-sensingswitches are functioning properly.e. Turn off 115-v power to furnace.f. Reconnect inducer motor wires, replace gas control door,and turn on 115-v power.CHECKLIST1. Put away tools and instruments, and clean up debris.2. Check SW-1 through SW-4 after completing installation toensure desired settings for thermostat type (SW-1 and SW-2)and blower-off delay (SW-3 and SW-4). Refer to Tables 6 and7.3. Verify manual reset switches have continuity.4. Ensure blower and gas control access doors are properlyinstalled.5. Cycle-test furnace with room thermostat.6. Check operation of accessories per manufacturer’s instruc-tions.7. Review User’s Manual with owner.8. Leave literature packet near furnace.SERVICE TRAININGPackaged Service Training programs are an excellent way to increase yourknowledge of the equipment discussed in this manual, including:• Unit Familiarization • Maintenance• Installation Overview • Operating SequenceA large selection of product, theory, and skills programs is available, using popularvideo-based formats and materials. All include video and/or slides, plus companionbook.Classroom Service Training plus "hands-on" the products in our labs can meanincreased confidence that really pays dividends in faster troubleshooting, fewercallbacks. Course descriptions and schedules are in our catalog.CALL FOR FREE CATALOG 1-800-962-9212[ ] Packaged Service Training [ ] Classroom Service Training21

/ 24

Related manuals for Carrier 58UHV Series