352.301328[ ]STD UNIT 55.001397[ ]OPTIONAL SOUND ENCLOSURE 57.00 [1448]29.13740[ ]STD UNIT 32.00813[ ]62.501588[ ]OPTIONAL SOUND ENCLOSURE 32.12 [816]MOBILITY KIT(WHEEL) OPTIONAL3.8598[ ]EDFOPTIONAL SOUND ENCLOSURE 48.42 [1230]OPTIONALSOUNDENCLOSURE65.05[1652]4.00 [102]ISOLATOR-OPTIONALCBA4.03102[ ]1.7544[ ]4.46[113]UNIT OPERATINGWEIGHT (lb) A B C D E F NO.OFCOMPRESSORS30MPA015 626 (284 kg) 17.80(452 mm)25.10(638 mm)31.49(800 mm) 5.54(141 mm)6.44(164 mm)18.50(470 mm) 230MPA020 635 (288 kg) 17.60(447 mm)25.20(640 mm)31.39(797 mm)30MPA030 722 (327 kg) 17.00(432 mm)26.00(660 mm)30.69(780 mm)5.87(149 mm)11.12(282 mm)17.95(456 mm)30MPA040 913 (414 kg) 17.50(445 mm)25.90(658 mm)33.50(851 mm) 5.99(152 mm)11.00(279 mm)17.72(450 mm) 330MPA045 934 (424 kg) 17.40(442 mm)26.00(660 mm)33.49(851 mm)COMPRESSOR(SEE TABLE FOR QTY)OUTINOPTIONAL SOUNDENCLOSUREFIELD CONNECTION(4) 7/8" K.ONON-FUSEDDISCONNECT(OPTIONAL)1/4" FPTACCESSP,TACCESSPORTS1/4" SAEFLARE RELIEFCONNECTIONPOWERENTRYWATER CONNECTIONS(IN/OUT)2" VICTAULIC (015-020)2 1/2" VICTAULIC (030-045)COOLERCOOLERCOOLERCONTROL PANEL ENDOPPOSITE CONTROL PANEL END MOUNTING HOLES 9/16"-MOUNTING HOLES 9/16"-INOUT040,045 TONONLYFORK POCKETSSCROLLINGMARQUEE DISPLAYREMOTE CONDENSERCONNECTIONLIQ. LINEISOLATION VALVELIQ. LINESOLENOIDVALVECONTROL BOXACCESS DOORCLEARANCE36"(914)ENSURE CLEARANCEPER LOCAL CODESCONTROL PANELEND OF UNITFig. 4 — Dimensions — 30MPA015-045 UnitsNOTES:1. Operating weight includes weight of water and refrigerant.2. Denotes center of gravity.3. Dimensions are shown in inches. Dimensions in [ ] are inmillimeters.4. Allow 36-in. (914 mm) clearance on control panel end, oppositecontrol panel end and above the unit. All clearances must be inaccordance with local codes.5. Denotes accessory or factory-installed option.a30-5032