OWNER’ S GUIDE - 5Names and Functions of the Buttons1. On/Off Button2. Mode Selector Button3. Fan Speed Selector Button4. On Timer Button5. Temperature Selector Buttons6. Off Timer Button1 2 MODE SELECTOR BUTTON - Press this button toselect the desired mode. In COOL mode, the unitwill run at the normal cooling mode. In DRY mode,the microcomputer of the unit controls the fanmotor and makes the unit automatically cycle onand off according to the room temperature. Thisenables the moisture to be removed moreefficiently. In FAN mode, only the fan will operateat the selected fan speed and circulate the roomair. In FURN. mode, the unit will run at the normalfurnace mode. (This is a user-optional function.)ON/OFF BUTTON - If you press this button, the unitwill begin operation. (You can hear receivingbeeps twice.) Press the button again, and opera-tion stops. (You can hear a receiving beep.) If youpress this button immediately after turning off theunit, the compressor will not operate for 3 minutesto prevent overloading.3 4 ON TIMER BUTTON - When the unit is turned off,press the ON TIMER button to select the desiredtime, in hours, for the unit to turn on.FAN SPEED SELECTOR BUTTON - Press this but-ton to select the desired fan speed of HIGH, LOWor AUTO in turn, and the fan will operate at theselected fan speed. If you select “AUTO”, the fanspeed will be controlled by the microcomputer ofthe unit.REMOTE CONTROL DESCRIPTIONSFANSPEEDON/OFFMODEFURN.COOLDRYFANAUTOLOWHIGHTEMP.FCONTIMER OFFTIMERTIMEROFFON