Carrier AquaForce PUREtec 30XAV-ZE 401 Installation, Operation And Maintenance Instructions

Contents

257.2.2 - Piping limitationsDepending on the unit size and options, the space betweenwater box connections and the nearest component canvary. This results in piping limitations. In the case ofstraight pipes, the space remaining available for pipeinsulation are listed in the table below.straight pipes clearance with nominal diameterXaV-ZE 401 501 551 651 701 851 901standard unitInlet (mm) 118 105 105 25 49 23 23Outlet (mm) 118 105 105 25 49 23 23Unit with option 100cInlet (mm) 118 105 105 25 49 23 23Outlet (mm) Elbow mandatory Elbow mandatory Elbow mandatory Elbow mandatory Elbow mandatory Elbow mandatory Elbow mandatoryUnit with option 107Inlet (mm) Elbow mandatory Elbow mandatory Elbow mandatory Elbow mandatory Elbow mandatoryOutlet (mm) Elbow mandatory Elbow mandatory Elbow mandatory Elbow mandatory Elbow mandatoryFor installation that requires thicker insulation, it is advised to use a pipe reduction or an elbow to avoid the closestcomponent. When straight pipe is not possible, use an elbow. Check elbow connection limitation in the table below.elbow connectionXaV-ZE 401 501 551 651 701 851 901standard unitInlet (mm) Check dimension Check dimension Check dimension OK OK OK OKOutlet (mm) Check dimension Check dimension Check dimension OK OK OK OKUnit with option 100cInlet (mm) Check dimension Check dimension Check dimension OK OK OK OKOutlet (mm) OK OK OK OK OK OK OKUnit with option 107Inlet (mm) Check dimension Check dimension Check dimension Check dimension Check dimensionOutlet (mm) Check dimension Check dimension Check dimension Check dimension Check dimensionCheck dimension : it is possible to install an elbow, but space available is limited and choice of the elbow size must be done in accordance with the dimensional drawings.Clearance