Carrier Aquasnap 30RAP010 Product Data

Also see for Aquasnap 30RAP010: Installation instructions Operation and service guide Start up & operation manual Product data

Contents

Carrier Aquasnap 30RAP010 Product Data Manual pdf 9 page image

9Factory-installed optionsNovation ® heat exchanger technology microchan-nel coil (aluminum fin/aluminum tube) e-coat con-denser is available for optimum durability. Novation heatexchangers with microchannel coil technology are offeredcoated or uncoated to match coil protection to site condi-tions. The Carrier Electronic Catalog (E-Cat) can be used todetermine whether or not corrosion protection is recom-mended for particular applications in coastal/marine envi-ronments. Following the input of the requested data, the E-Cat program output will advise the appropriate coil to beused. Other factors described in "Selection Guide: Environ-mental Corrosion Protection, Novation Heat Exchangerwith Microchannel Coil Technology" catalog number 04-581042-01 must also be considered to determine if corro-sion protection is required.Value sound fans provide a metal, propeller-type fan sys-tem which is cost-effective when compared to the low-sound AeroAcoustic™ fan system. This factory-installed fanoption is compatible with the Motormaster® V option.Ultra-low sound provides a combination of low soundAeroAcoustic™ fans with sound blankets.Digital compressor control allows incremental unload-ing for a closer match to building load. This option is notavailable on the 018 size unit.High short circuit current rating provides a short cir-cuit current rating protection for the unit up to 65,000 Aon 460-v, 380-v, and 208/230-v units or 25,000 A on575-v units.Motormaster® V low-ambient control provides con-trol of fan motor operation to maintain head pressure atlow outdoor ambient temperatures down to –20 F (–29 C)This option also requires field-installed wind baffles. Thisoption is also available as an accessory. This option is astandard feature on all 30RAP010 and 015 chillers.Non-fused disconnect includes factory-installed non-fused disconnect capability for power and control locatedat the unit.Energy management module provides energy manage-ment capabilities to minimize chiller energy consumption.Several features are provided with this module includingleaving fluid temperature reset, cooling set point reset ordemand limit control from a 4 to 20 mA signal, 2-pointdemand limit control (from 0 to 100%) activated by aremote contact closure, and discrete input for “Ice Done”indication for ice storage system interface. The EMM isalso available as an accessory.Freeze protection with cooler heaters provides protec-tion from cooler freeze-up to –20 F (–29 C).GFI convenience outlet is a factory-installed conve-nience outlet that includes 4-amp GFI (ground fault inter-rupter) receptacle with independent fuse protection.Convenience outlet is 115-v female receptacle. This optionis also available as an accessory.ITEM FACTORY-INSTALLED OPTION FIELD-INSTALLED ACCESSORYCondenser Coil and Sound OptionsMCHX E-Coat XLow Sound Compressor Blankets XValue Sound Fans XUltra-Low Sound XControls/Communication OptionsBACnet Communications XBACnet Translator Control XChillervisor System Manager III Multi-Unit Control XEnergy Management Module (EMM) X XLON (Local Operating Network) Translator Control XNavigator™ Display XRemote Enhanced Display XTouch Pilot™ Display XCooler OptionsFreeze Protection — Cooler Heaters XRemote Cooler Kit XElectrical OptionsUnit-Mounted Main Disconnect, Non-Fused XGFI Convenience Outlet (115 v) X XHigh SCCR (Short Circuit Current Rating) XHydronics OptionHydronic Pump Package XFluid Storage Tank XRefrigeration Circuit OptionsLow Ambient Temperature Head Pressure Control X XHot Gas Bypass (not available on sizes 010 and 015) X XDigital Compressor (not available on size 018) XSecurity/Packaging OptionsSecurity Grilles/Hail Guards X XVibration Isolation XWind Baffles XOptions and accessories