Carrier BW9 User's Information Manual

Also see for BW9 Series: User manual Installation instructions Operation and maintenance guide

WHATTO DO IFYOU SMELL GASDo not try to light ally appliance. Do not touch ally electric switch; do not use ally phone ill your building. Iruruediately call your gas supplierfrom a neighbor's phone. Follow the gas supplier's instructions. If you cannot reach your gas supplier, call the fire department.Use only your hand to turn the gas control knob. Never use tools. If the knob will not turn by hand, don't try to repair it; call a qualified servicetechnician. Force or attempted repair may result in a fire or explosion.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replaceany part of the control system and any gas control, which has been under ware1:1. Set the thermostat to lowest setting. (See Fig. 11)2. Turn off all electric power to the appliance. (See Fig. 12)MODE FANuPDOWN11 12 133. This appliance is equipped with all ignition device, which autoruatically lights tile burner. DO NOT try to light tile burner by hand.4. Remove the front jacket panel. (See Fig. 14 or 16)5. Turn the gas control knob clockwise to "OFF" on BW9 050, 075 and 100 models. (See Fig. 17) On BW9 125, 150, 175 and 200 modelsturn manual gas control valve to "OFF". (See Fig. 15)14Model BW9-125 Through 20015160GASINLETModel BW9-50Through 100OFFGAS CONTROLKNOB SHOWNIN "ON" POSITION176. Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow "WHAT TO DOIF YOU SMELL GAS" in the instructions above. If you don't smell gas, go to next step.7. Turn the gas control knob counterclockwise to "ON" for BW9 050, 075 and 100 ruodels. (See Fig. 18) On BW9 125, 150, 175 and 200models turn manual gas control valve to "ON". (See Fig. 19)--5--

/ 8

Related manuals for Carrier BW9 Series