Carrier G Series Heating Owner's Manual

Also see for G Series: Owner's manual Installation instructions

Carrier G Series Heating Owner's Manual Manual pdf 17 page image

UNIT OPERATIONTIMER OPERATIONON TimerPROCEDUREON TIMER buttonPress this button.On start up, time is set at 6:00 A.M..HOUR, MINUTE buttonsPress these buttons to set the start-up timedesired while the ON Timer symbol is flashing.RESERV. buttonPress this button when pointing the remote control towardsthe receiver of the indoor unit.• A receiving beep is heard.• TIMER lamp of the indoor unit illuminates.MODE, FAN, FLAP, and TEMP. buttonsSet the desired operation mode with these buttons.About ON Timer• When the ON Timer is set, the unit monitors the roomtemperature for 1hour before the set time to make surethe room condition is reached by the reserve time.• The actual on time of the unit is earlier that the reservedtime by 0 to 40 minutes according to the differencebetween room temp. and set temp.1234NOTE• The current time is not indicated during the reservation of ON/OFF Time.• When you want to know the current time, press the CLOCK button and you will see the current time for 5 seconds.• If you reserve the ON Timer during operation, the unit will operate continuouslyON/OFFTEMP .SLEEPMODE FAN FLAPCLOCK EVERYDAY HOUR MINUTERESERV .TIMERON OFFCANCELAAOWNER ,S MANUAL - 15