Carrier Infinity Control Homeowner's Manual

Also see for Infinity Control Home: Homeowner's guide Homeowner's guide Installation instructions Homeowner's guide Installation instructions

Contents

Carrier Infinity Control Homeowner's Manual Manual pdf 10 page image

Turn System On/OffThe OFF button is used to turn the system both on and off.HeatingTo select heating, press the red HEAT button.Heating is confirmed when the red LED adja-cent to the red HEAT button is lit. Heating isoperating when the red LED is gradually puls-ing on and off at a rate of 2.5 cycles per sec-ond. (The LEDa can be turned off. For details,see ADVANCED SETUP - LIGHTING on page26.) The heating temperature will appear in thelower right screen with the text, "HEAT AT"Auxiliary HeatAuxiliary heat is staged electric heating included with many heatpump systems. Auxiliary heat is automatically activated by thesystem when it's too cold for the heat pump to effectively heatyour home. Auxiliary heat operation is confirmed when the redLED adjacent to the red HEAT button is lit, gradually pulsing on,then off, continuously every t.25 seconds. (The LEDs can beturned off. For details, see ADVANCED SETUP - LIGHTING onpage 26.) The text, 'AUXILIARY HEAT ACTIVE" will appear belowthe room temperature.Emergency HeatEmergency heat is staged electric heating included with manyheat pump systems. Emergency heat is activated either when theheat pump has malfunctioned and heating is required, or when