Carrier Infinity SYSTXCCITW01 Installation Instructions Manual

Also see for Infinity SYSTXCCITN01: Owner's manual Owner's manual

Contents

Carrier Infinity SYSTXCCITW01 Installation Instructions Manual Manual pdf 15 page image

7Sensor 1 Sensor 2Sensor 3 Sensor 4Damper ControlModuleZS_Damper ControlModuleZS_CA032334.3.3. Smart Sensors (for zoning applications)Any zone may use a Smart Sensor. It provides a temperature display and buttons toadjust the desired temperature in that zone only. It also displays outdoortemperature and indoor humidity sensed at the control. Only one Smart Sensor maybe used per zone. They cannot be averaged like Remote Room Sensors. If a SmartSensor is used in a zone, a Remote Room Sensor may also be used in the samezone. The Remote Room Sensor has priority over the Smart Sensor. The SmartSensor will display the Remote Room Sensor temperature.NOTE: Smart Sensors must be addressed to identify which zone it will control. SeeSmart Sensor Installation Instructions for details.4.4. Wiring ConsiderationsOrdinary thermostat wire is recommended. Use 22 AWG or larger for normalwiring applications. Continuous wire lengths over 100 ft. should use 20 AWG orlarger.