7Manul operation can be used temporarily in case the remote controller is disable or maintenancenecessary.OPERATING INSTRUCTIONSManual operationManual controlbuttonFront panelAUTO/COOLNOTE: This manual does not include Remote Controller Operations, see the<> packed with the unit for details.Operating temperatureMode Cooling operation Heating operation Drying operationTemperature1. If air conditioner is used outside of the above conditions, certain safety protectionfeatures may come into operation and cause the unit to function abnormally.2. Room relative humidity less than 80%. If the air conditioner operates in excess of thisfigure, the surface of the air conditioner may attract condensation. Please sets the verticalair flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.3. Optimum performance will be achieved within these operating temperature.Suggestion: For the unit adopts an Electric Heater, when the outside ambient temperature isObelow 0 C, we strongly recommend you to keep the machine plugged in order to guarantee itrunning smoothly.Room temperatureOutdoor temperature。>17 C。 。0 C 50 C。<30 C。 。-15 C 34 C 。 。0 C 50 CCAUTION:~~ ~。 。( -15 C 50 C:For the models withlow temperature cooling system)~。>10 COpen and lift the front panel up to an angleuntil it remains fixed with a clicking sound.One press of the manual control button willlead to the forced AUTO operation. If pressthe button twice within five seconds, the unitwill operate under forced COOL operation.Close the panel firmly to its originalposition.The forced cool mode is used for testingpurposes only. You had better not choose it.To restore the remote controller operation,use the remote controller directly.CAUTION:132●●NOTE: The unit must be turned off beforeoperating the manual control button. If theunit is operational, continue pressing themanual control button until the unit is off.
