Carrier N Style Owner's Manual
                        | |
Contents
| 
E - 929. USE OF THE REMOTE CONTROLStart / Stop (Button 1 )When the air conditioner is not in operation, the remote control readoutwill display the time of day only (in case other symbols are lit,turn control off by pressing button ).Press button to start the air conditioner.All selected and memorized functions will light up and appear;the system will operate according to the functions selected.Press button to stop the air conditioner. All indicators onthe indoor unit will go out, and the control will display onlythe current time.If the unit does not stop, turn the control on (by pressing button )and repeat the operation.If button (air conditioner starting) is pressed too soon aftera stop, the compressor will not start for 3/5 minutes due to the inherentprotection against frequent compressor cycling .The indoor unit willonly emit a “beep”, when the signals are received correctly.Selection of operating mode (MODE) (Button 2 )With this button the operating mode of the air conditioner can be selected.By repeatedly pressing this button the available modes will be selectedin sequence.The chosen mode is shown as follows, while the indoor unitwill acknowledge signal receipt with a confirming beep.Indicated SymbolAutomatic Cooling / Heating( only for heat pump system )Cooling with dehumidificationVentilation (fan only)Dehumidification onlyHeating( only for heat pump system )1 |
Related manuals for Carrier N Style
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine