Carrier P User Manual

274. Remove the thermostat capillary from the outdoorcoil and clip any wire ties holding the capillary inplace.5. Disconnect the wires and carefully remove thethermostat and capillary from the unit, notinglocation of wires for easy re-assembly.6. Reverse Steps 1-5 to reinstall. CAPACITOR — To remove the capacitor, performthe following steps:1. Turn off unit power as described in UNITDISASSEMBLY section.2. Open the control box as detailed in the UNITDISASSEMBLY section of this manual.3. Properly discharge the capacitor as described inthe Capacitor section under Component Opera-tion and Troubleshooting.4. Remove the leads to the capacitor. Note the wirelocations to ease re-assembly.5. Remove the screw holding the capacitor.6. Remove capacitor.7. Reverse Steps 1-6 to reinstall. FAN CYCLE SWITCH — The fan cycle switch islocated on the front of the control box. To remove thefan cycle switch, perform the following steps:1. Turn off unit power as described in UNITDISASSEMBLY section.2. Open the control box as described in UNITDISASSEMBLY section of this manual.3. Remove the 3 wires from the fan cycle switch. SeeFigure 52 for location, noting location of wires forre-assembly.4. Push the snaps of the switch housing toward theswitch with a pair of pliers or small screwdriver.Gently push the switch out of the housing.5. Reverse Steps 1-4 to reinstall. SELECTOR SWITCH — To remove the selectorswitch from the unit, perform the following steps:1. Turn off unit power as described in UNITDISASSEMBLY section.2. Remove selector switch knob. See Figure 51.3. Open control box as described in the UNITDISASSEMBLY section of this manual.4. Remove all the wires to the selector switch. Labelwires to simplify re-assembly. See Figure 52.5. Remove the 2 screws mounting the switch andremove switch.6. Reverse Steps 1-5 to reinstall.PLAIN WIRE (L1)TO ROTARY SWITCHGROUND SCREWFAN CYCLESWITCHINDOORTHERMOSTAT SELECTORSWITCHCAPACITOROUTDOOR FROSTTHERMOSTATRIBBED WIRE (L2)TO CAPACITOR (C)POWER CORDPOWER CORDFIGURE 52 — COMPONENT LOCATIONSIN OPEN CONTROL BOX