Carrier PH4G-B Series Installation Instructions Manual

©2020 CAC/BDP• 7310 W. Morris Street • Indianapolis, IN 46231 Edition Date: 04/20 Catalog No: IM-PH4G-07Replaces: IM-PH4G-06PH4G--B: Installation InstructionManufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.34Start-Up Checklist(Remove and Store in Job Files)I. PRELIMINARY INFORMATIONMODEL NO.: ____________________________________________SERIAL NO.: ____________________________________________DATE: __________________________________________________TECHNICIAN:___________________________________________II. PRESTART-UP (Insert check mark in box as each item is completed)( ) VERIFY THAT ALL PACKING MATERIALS HAVE BEEN REMOVED FROM UNIT( ) REMOVE ALL SHIPPING HOLD DOWN BOLTS AND BRACKETS PER INSTALLATION INSTRUCTIONS( ) CHECK ALL ELECTRICAL CONNECTIONS AND TERMINALS FOR TIGHTNESS( ) CHECK THAT INDOOR (EVAPORATOR) AIR FILTER IS CLEAN AND IN PLACE( ) VERIFY THAT UNIT INSTALLATION IS LEVEL( ) CHECK FAN WHEEL, AND PROPELLER FOR LOCATION IN HOUSING/ORIFICE AND SETSCREW TIGHTNESSIII. START-UPELECTRICALSUPPLY VOLTAGE _______________________________________COMPRESSOR AMPS ____________________________________INDOOR (EVAPORATOR) FAN AMPS _______________________TEMPERATURESOUTDOOR (CONDENSER) AIR TEMPERATURE __________ DBRETURN-AIR TEMPERATURE__________ DB ___________ WBCOOLING SUPPLY AIR ________________ DB ___________ WBHEAT PUMP SUPPLY AIR _________________________________ELECTRICAL HEAT SUPPLY AIR __________________________PRESSURESREFRIGERANT SUCTION____________ PSIG,SUCTION LINE TEMP* ___________________REFRIGERANT DISCHARGE ____________ PSIG, LIQUID TEMP†_______________________( ) VERIFY REFRIGERANT CHARGE USING CHARGING CHARTS* Measured at suction inlet to compressor{Measured at liquid line leaving condenser.

/ 34

Related manuals for Carrier PH4G-B Series