Carrier RTU Open Controls, Start-up, Operation And Troubleshooting

Also see for RTU - OPEN: Controls, Start-Up, Operation and Troubleshooting Instructions Installation and startup guide

43AIRSIDE LINKAGE (cont)RTU PropertiesMenu>Maintenance(AirsideLinkage)N/A Unoccupied CoolingSetpointlink_unocc_cl_stpt 75-130°F Properties>Control ProgramMaintenance>Airside LinkageN/A Unoccupied HeatingSetpointlink_unocc_ht_stpt 55-85°FN/A Indoor Air CO2 (ppm) link_iaq xxx ppmN/A Space RelativeHumiditylink_sprh xxx%N/A Linkage Max DamperPositionlink_max_dmpr 0-100%N/A Linkage Optimal Start a_link_opt_start Inactive/Active1 This point is only visible when Input 3, 5, 8, or 9 is configured for Fan Status2 This point will be hidden from view if Unit Type is configured for LC WeatherExpert3 This point is only visible when Fan Control is configured for Variable Speed4 This point is only visible when Fan Control is configured for Two Speed5 This point is only visible when Unit Type is configured for HP O/B Ctrl or HP Y1/W1 Ctr6 This point is hidden from view when Continuous Occupied Exhaust is enabled7 This menu is hidden from view when RH Control is set to Disable8 This menu is hidden from view when DCV Control is set to Disable9 This point is visible when Fan Control is configured for Variable Speed and not LC WeatherExpert10 These points are not visible when unit type is configured for LC WeatherExpert11 This point is visible when Unit Type is configured for HP O/B CtrlTable A — User Interface Menus (cont)EquipmentTouch MenuAccessLevel3=ADMIN2=USER1=No PWPOINT NAME BACnet Object RANGE DEFAULT Field AssistantMenuAPPENDIX A — USER INTERFACE MENUS (CONT)