Carrier TP-WEM01 Installation Instructions Manual

Also see for TP-WEM01: Owner's manual Installation guide Advanced installation and configuration instrucrions

Contents

Carrier TP-WEM01 Installation Instructions Manual Manual pdf 6 page image

3INSTALLATIONInstallation Notes:d The maximum wire size to be used in the installation is22AWG (0.50mm2) with 0.8mm insulationd No part of the control should be installed directly outdoors orin a cabinet outdoorsd The control assembly base should be mounted before wires areattachedThermostat location:d Approximately 5 ft. (1.5m) from floor.d Close to or in a frequently used room, preferably on an insidepartitioning wall.d On a section of wall without pipes or duct work.Thermostat should NOT be mounted:d Close to a window, on an outside wall, or next to a door lead-ing to the outside.d Exposed to direct light or heat from the sun, a lamp, fireplace,or near other temperature--radiating objects which could causea false reading.