Carrier WIRELESS STANDARD SENSOR Installation Manual

Contents

Carrier WIRELESS STANDARD SENSOR Installation Manual Manual pdf 44 page image

Adjusting Wireless Adapter and wireless sensor settingsWireless Sensors CARRIER CORPORATION ©2018Installation Guide All rights reserved40The Wireless Adapter and wireless sensors have preconfigured settings in SensorBuilder that you may need toadjust for your installation.To edit the Wireless Adapter's settings1 In the Driver pane, right-click WS Adapter, and then select Discover Devices.2 In the Devices pane, select the Wireless Adapter.3 Click Yes to read its configuration.4 On the Device configuration > Settings tab, edit the information as needed. See table below.5 After you have made edits on the Settings tab, right-click the Wireless Adapter in the Devices pane, and thenselect Send Configuration.Field Notes°F or °C Select the format that the Wireless Adapter will use when it sends temperatures to thei-Vu® application. If you change this setting, you must send the configuration (step 5above) and then click Reboot.NOTE If you have i-Vu® controllers loaded with metric applications, you must select°C.Reset Click to reset the Wireless Adapter to its factory default settings.Key 1, 2, 3 To create security for your Wireless Adapter, you can define keys that a user will haveto enter before SensorBuilder will read the Wireless Adapter's configuration.The default number for each key is 000. To create new keys, highlight the 3 dots ineach key field, and replace with a number between 000 and 255.To edit Wireless Adapter settings for sensorsPREREQUISITE You must have already paired sensors to the Wireless Adapter.The Wireless Adapter holds the information described below for each sensor. To edit these settings, right-click asensor on the Wireless Adapter's Device configuration > Sensors tab, and then select an option.Field NotesEnOceanID Every device is given a unique ID number by the manufacturer. (Not editable)Rnet ID The sensor's address on the Rnet.Adjusting Wireless Adapter and wireless sensor settings