Cart-Tek GRX-1250Li User Manual
                         | |
Page 19 of 25LED will start rapid flashing.• After a round of rapid flashing release the on/offbutton.• Disconnect the USB cable and press the “ParkingBrake” button on the remote.• Press the On/Off button to get a solid green LED oncaddy.• Test all remote buttons.TROUBLE SHOOTING GUIDEMy caddy will not show any indicator LED on the caddy handle.1. Ensure Caddy Battery is plugged into the Caddyreceptacle.2. Have a full charge on Caddy Battery. After 3 -‐ 5 hours, thebattery charger LED will turn GREEN.3. If problem persists, call Cart Tek for Technical Support.My caddy will not show a solid green indicator LED on the caddyhandle.1. Make sure you can get a flashing green indicator LED first.2. Press and hold the On/off button for 3 seconds3. If problem persists, call Cart Tek for Technical Support.My caddy is turned on (solid green LED), but my remote will notwork.1. Make sure the on/off switch is in the on position on theremote control transmitter.2. Try restarting the caddy by disconnecting the battery for5 seconds, then powering the caddy back on. Test remoteagain. |
Related manuals for Cart-Tek GRX-1250Li
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine