Casio AP-200 Manual

Also see for CELVIANO AP-200: User guide Service manual & parts list

Casio AP-200 Manual Manual pdf 12 page image

12Note 1: Received values and parameter setting valuesThe range of the value of each DSP Parameter 7 array element depends on the selected DSP or array number.Unlike manipulation of a DSP parameter using a System Exclusive Message, a value received by this control change messageis always a value from 0 to 127, but the value is changed in accordance with the setting range of the applicable parametersetting. Because of this, it is impossible for a value to be outside of the range of the applicable parameter setting.Conversion from the value received with the message to the parameter setting value is performed can be represented ingeneral terms by the expression shown below.For details about Parameter 7 of each DSP, see the explanations under "Part VI DSP Parameter List".9.8 Hold1 (40H)FormatSendSent when a pedal that has a sustain (damper) function is operated.ReceiveReceipt performs an operation equivalent to a sustain (damper) pedal operation.Timbre Type Specific OperationThis operation differs in accordance with the Timbre Type (see "11.1 About the Timbre Type") setting.• Timbre Type: MelodySustain off/on control is performed in accordance with the value of the received message. For information aboutthe relationship between setting values and send/receive values, see the "25.1 Off/On Setting Value Table" in "PartVII Setting Values and Send/Receive Values" of this document.• Timbre Type: PianoContinuous control of the piano tone decay rate and the decay rate of Acoustic Resonance effect resonance isperformed in accordance with the value of the received message.• Timbre Type: DrumThe received message does not affect sound source operation.Acoustic ResonanceWhen a part that is using Acoustic Resonance receives this message, the resonance characteristics of Acoustic Resonanceare continually altered in accordance with the message value.9.9 Sostenuto (42H)FormatNote 1:For information about the relationship between setting values and send/receive values, see the "25.1 Off/On Setting ValueTable" in "Part VII Setting Values and Send/Receive Values" of this document.Parameter Setting Value = Parameter Minimum Value + (Parameter Maximum Value - Parameter Minimum Value) × Received Value127Message Format: BnH 40H vvHn: MIDI Channel Numbervv: ValueMessage Format: BnH 42H vvHn: MIDI Channel Numbervv: Value (Note1)