3620.4 System Reverb ParametersNote 1:Selects the System Reverb preset type. Receipt of GM/GS Reset selects Hall2. This is the value of this Type is also linkedto each of the System Reverb parameters and to the System Reverb Return Level parameter, and changes them to prescribedvalues. For details about the preset type list, see “26.5 Reverb Type Setting Value Table”.20.5 System Acoustic Resonance ParametersNote 1:Changing this parameter configures the Tuning setting of System Acoustic Resonance. When the Instrument’s Master FineTune8 setting is changed, this parameter is reset to the Master Fine Tune8 value.Note 2:Changing this parameter performs a Damper Pedal operation on System Acoustic Resonance. When the damper pedal ofthe part being used by System Acoustic Resonance is operated, this parameter is reset to the depth of the damper pedaloperation.Note 3:The value is set when the damper pedal is completely depressed.20.6 Brilliance ParametersNote 1:Selects Master EQ mid 6 (Brilliance) gain. See “26.8 Brilliance Gain Setting Value Table”.Parameter ID R/W Block Size Array Min-Def-Max DescriptionCancelTypeFeedbackEr LevelDampTone008000810082008300840085R/WR/WR/WR/WR/WR/W000000↑↑↑↑↑17777701010101010100-00-0100-04-0F00-40-7F00-40-7F00-67-7F00-65-7F0...Normal1...Cancel1-16 (Note1)0-1270-1270-1270-127Parameter ID R/W Block Size Array Min-Def-Max DescriptionCancelTuningDamper PedalWet Level MaxLow Boost FreqLow Boost LevelHigh Cut Freq003000310032003B003C003D003ER/WR/WR/WR/WR/WR/WR/W000000↑↑↑↑↑↑177161616160101010101010100-00-0100-40-7F00-00-7F0000-0800-7FFF0000-0A00-40000000-7FFF-7FFF0000-2F00-7FFF0...Normal1...Cancel–100 - 0 - +99(cent) (Note1)0-127 (Note2)0x0000-0x7FFF (Note3)0x0000-0x40000x0000-0x7FFF0x0000-0x7FFFParameter ID R/W Block Size Array Min-Def-Max DescriptionTypeMid6 Gain00A000AER/WR/W000000↑77010100-00-0100-0C-180...For Speaker1...For Phones–12 - 0 - +12 (Brilliance) (Note1)