EnglishUsing Auto AccompanimentE-41■ Using Synchro StartUse the following procedure to configure the Digital Piano tostart Auto Accompaniment play as soon as you press akeyboard key.1. Press 6.This enters accompaniment start standby.2. Play a chord on the keyboard.This will start full part accompaniment (normal).Any of the following operations can be performed while insynchro standby to start a non-normal pattern.• To start with intro pattern, press 3.• To start with variation pattern play, press 5.Use the following procedure to change Auto Accompanimentspeed to a level that suits you.1. Press 9.Use w (slower) and q (faster) to change the temposetting. Holding down either button changes the setting athigh speed.• Pressing w and q at the same time will initialize thetempo setting in accordance with the currently selectedrhythm.• While the tempo value is flashing, you also can use br(10-key) to change it.• If you do not perform any operation for a few secondsafter the tempo setting screen appears, the display willreturn to the screen displayed before you pressed 9.Use the following procedure to adjust the balance betweenwhat you are playing on the keyboard and the volume of theAuto Accompaniment.1. Press ck (FUNCTION) and then use the br(10-key) [4] (U) and [6] (I) keys to display“AcompVol” (page E-7).2. Use the br (10-key) [–] and [+] keys to adjustthe accompaniment volume.With One-Touch Preset, the Digital Piano automaticallyconfigures optimal tone, tempo, and other settings inaccordance with the rhythm pattern you select.1. Hold down bo (RHYTHM) until the current tonescreen appears on the display.This will automatically apply the One-Touch Presetsettings in accordance with the rhythm pattern that iscurrently selected.2. Play a chord on the keyboard.This will start accompaniment automatically.Changing Auto Accompaniment Speed(Tempo)FlashesFlashesAdjusting the Accompaniment VolumeUsing One-Touch PresetA c o mpV o l