Casio CFX-9970G Data Communications Manual
Also see for CFX-9970G: User guideProduct manualManualManualManual
           | |
42222-6 Screen Send FunctionThe following procedure sends a bit mapped screen shot of the display to aconnected computer.uuuuuTo send the screenP.416 1. Connect the unit to a personal computer or to a CASIO Label Printer.P.417 2. In the data communication main menu, press 6 (IMGE) and the followingdisplay appears.3 4 5 6• {OFF} ... {graphic images not sent}• {MONO}/{COLR} ... {monochrome}/{color} bitmap3. Press a function key to specify either “Monochrome” or “Color” for the ImageSet Mode.4. Display the screen you want to send.5. Set up the personal computer or Label Printer to receive data. When the otherunit is ready to receive, press M to start the send operation.P.417 • Selecting “Monochrome” for Image Set allows data to be sent to any CASIOLabel Printer equipped with data communications capabilities.Selecting “Color” allows data to be sent to Color Label Printer models only.You cannot send the following types of screens to a computer.• The screen that appears while a data communication operation is in progress.• A screen that appears while a calculation is in progress.• The screen that appears following the reset operation.• The low battery message.• The flashing cursor is not included in the screen image that is sent from theunit.• If you send a screen shot of any of the screens that appear during the datasend operation, you will not be able to then use the sent screen to proceedwith the data send operation. You must exit the data send operation thatproduced the screen you sent and restart the send operation before you cansend additional data.• You cannot use 6mm wide tape to print a screen shot of a graph. |
Related manuals for Casio CFX-9970G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine