Playing Built-in SongsE-30Use the following procedure to adjust the balance betweenthe volume of what you play on the keyboard and songplayback volume.1. Press ct (FUNCTION) and then use the br(10-key) [4] (o) and [6] (p) keys to display“Song Vol” (page E-7).2. Use the br (10-key) [–] and [+] keys to adjustthe song volume.The procedure below lets you select the same keyboard toneas the one being used in the song and play along with yourfavorite tunes.1. After selecting a song, hold down bp (SONGBANK) for about two seconds until thedisplayed tone name changes to the tone nameof the song.• If your currently selected tone is the same as the songtone, the display contents will not change.2. Play along with song playback.• If you select a song that uses different tones for left andright hand play, the right hand part tone is assigned to thekeyboard.You can turn off the right hand part or the left hand part of asong during playback and practice playing along with theremaining part.1. Press bl to select the part you want to turn off.Each press of bl cycles through the settings shownbelow.2. Press bl.This starts playback in accordance with the setting youselected in step 1.• During playback with one part turned off, only the notes ofthe part that is turned off are shown on the display.You can load song data from an external device and increasethe selection of songs available on the keyboard. See thefollowing pages for more information.• Memory card (page E-59)• Computer (page E-68)• For information about how to delete song data loaded froman external device, see page E-58.Adjusting the Song VolumePlaying with the Tone as Song PlaybackS o ngV o lTurning Off the Part of One Hand for Practice(Part Select)Increasing the Selection of SongsRight hand part offLeft hand part offBoth hand parts offBoth hand parts on