E-41RHYTHM TRACK 1TRACK 2SONG MEMORY704A-E-043AYou can store up to two separate songs in song memory forlater playback. The song memory function records yourkeyboard play in real time, as you play it.NOTE• To use song memory, first press the RHYTHM button toenter the Rhythm Mode.TracksThe song memory of this keyboard records and plays backnotes much like a standard tape recorder. There are two tracks,each of which can be recorded separately. Besides notes, eachtrack can be assigned its own tone number. During playbackyou can adjust the tempo to change the speed of playback.NOTE• Track 1 is the basic track, which can be used to recordAuto Accompaniment along with the melody. Track 2 canbe used for melody only, and is for adding to what isrecorded in Track 1.• Note that each track is independent of the other. Thismeans that if you make a mistake while recording, youneed to re-record only the track where the mistake wasmade.Song Memory FunctionTrack 1Start EndTrack 2Auto Accompaniment(rhythm, bass, chords), melodyMelodyData recorded in trackSONG MEMORY Button OperationEach press of the SONG MEMORY button cycles through thefunctions shown below.Selecting a TrackPress the TRACK 1 button to select Track 1 and the TRACK 2button to select Track 2. The letter “L” (left) appears on thedisplay to indicate Track 1 is selected, and the letter “R” (right)appears to indicate Track 2 is selected.PlaybackEach press of the TRACK 1 and TRACK 2 button while thekeyboard is in playback standby (see “SONG MEMORYButton Operation” above) toggles playback of thecorresponding track on and off. The letter that identifies atrack (L or R) appears on the display whenever playback ofthat track is turned on.• With the above setting, Track 1 will play while Track 2 willnot play.PlaybackStandbyRecordStandbyIndicator appears Flash UnlitNormalPlaybackturned onPlaybackturned offTrack 1 Track 2CTK591_e_41-45.p65 03.10.7, 4:27 PM41