Casio CTK-7000 User Manual

Also see for CTK-7000: Appendix User manual

Contents

Casio CTK-7000 User Manual Manual pdf 54 page image

Using Drawbar Organ TonesE-52Tone areas numbered L:051 through L:100 are for storage ofuser drawbar organ tones. You can have up to 50 userdrawbar organ tones stored in memory at one time.You can recall a user drawbar organ tone by pressing theR-12 ([L] DRAWBAR ORGAN) button and then using the dialor the R-14 (–, +) buttons to specify the tone number youwant. After recalling a user drawbar organ tone, you canperform the same operations as those supported for presetdrawbar organ tones. For more information, see “To selectand play with a drawbar organ tone” (page E-50).1. Select the drawbar organ tone you want to edit.• Perform the procedure under “To select and play with adrawbar organ tone” (page E-50).• At this point, you can perform operations with slidersD-4 (16') through D-12 (1'), and the D-2(PERCUSSION SECOND) and D-3 (PERCUSSIONTHIRD) buttons before starting the tone editingoperation. For details about using the sliders andbuttons, see “Adjusting a Drawbar Organ Tone in RealTime” (page E-51) and “To configure the level meter toshow the harmonic overtone level of each sliderposition” (page E-51).2. Press the C-8 (TONE EDITOR) button.• This displays the drawbar editor screen.• You can use the R-17 (u, i) buttons to scrollbetween pages.3. Use the R-17 (t, y) buttons to move the 0 tothe parameter you want to change.• For information about the operation and the settingrange of each parameter, see “Drawbar Organ ToneParameter Settings” (page E-53).4. Use the dial or the R-14 (–, +) buttons to changethe setting value.• Pressing the R-14 (–, +) buttons at the same timereturns a parameter to its initial default setting.5. Repeat steps 3 and 4 as required to configureother parameters.6. To store a rhythm after you edit it, hold downthe R-13 (FUNCTION) button as you press theC-17 (MENU) button.• This displays the drawbar edit menu.7. Press the R-16 (ENTER) button.• This displays a screen for specifying the destinationuser drawbar organ tone number and tone name.8. Use the dial or the R-14 (–, +) buttons to selectthe destination user drawbar organ tonenumber you want.9. Use the R-17 (u, i) buttons to move thecursor to the name character position you wantto change, and then use the dial or R-14 (–, +)buttons to select the character you want.• For details about the characters you can input, see“Supported Input Characters” (page E-160).• To input a space, press both of the R-14 (–, +) buttonsat the same time.10. Press the R-16 (ENTER) button.• A message (Replace?) will appear asking if you want tooverwrite the data currently in the destination with thenew data. Press the R-14 (YES) button to overwrite.• The message “Please Wait” will remain on the displaywhile a data save operation is in progress. Do notperform any other operation while it is displayed.Turning off the Digital Keyboard or removing thememory card can cause Digital Keyboard data to bedeleted or become corrupted. It also can cause theDigital Keyboard to fail to turn on when the L-1(POWER) button is pressed. If this happens, refer to“Troubleshooting” (page E-150).Editing Drawbar Organ TonesUser Drawbar Organ Tone NumbersTo edit a drawbar organ tone and store it