Casio Cassiopeia E-115 Getting Started Manual

Also see for Cassiopeia E-115: User guide

24Using a CompactFlash CardYour CASSIOPEIA supports Type I and Type II CompactFlash cards (3.3V).Important• The card slot cover will not close when certain types of cards are in the slot. Removethe card slot cover and keep it in a safe place so you can replace it when you removethe card.• Gently but firmly slide the card into place as far as it will go, but do not force it.Forcing a card can damage connectors. If you have problems inserting a card, pull itout and check to make sure it is oriented correctly.• We strongly recommend that you store all unsaved data you are inputting or editingbefore performing this procedure.• Sometimes, your CASSIOPEIA may not be able to detect a CompactFlash card. Thisis indicated when a program on the card does not start up normally. When thishappens, remove the card, reinsert it, and then press the CASSIOPEIA RESETbutton.• Your CASSIOPEIA supports 3.3V CompactFlash cards only. Cards that can operateon 5.0V only are not supported.• Use of an IO card that requires large amounts of power can cause the CASSIOPEIAto restart when CASSIOPEIA battery power is low.1. Make sure your CASSIOPEIA is turned off.• Press the [Power] button to turn off power.2. Pressing upward at the point indicated in the illustration, slide the cover up to open it.3. If there is already a card in the slot, remove it.ImportantPull the cover out as far as it willgo and then swing it open.Press upward here.