Casio GZ-5 Service Manual

Also see for GZ-5: Operation manual

Contents

— 4 —Operation 2The MIDI messages listed below are transmitted when completing the operation shown in the followingtable.Example of operation : CONTROL + VELOCITY, XXX, ENTERPress CONTROL button and VELOCITY button at the same time.Use the 10-key pads, enter a 3-digit number.Press ENTER button.Notes: 1. See the appendix for information about a value to be entered, "XXX".2. For details of MIDI message and operation, see GZ-5 operation manual.MIDI Message OperationProgram change CONTROL + PROGRAM CHANGE, XXX, ENTERVolume CONTROL + VOLUME, XXX, ENTERPan CONTROL + PAN, XXX, ENTERExpression CONTROL + EXPRESSION, XXX, ENTERHold 1 CONTROL + HOLD 1, XXX, ENTERSoft pedal CONTROL + SOFT PEDAL, XXX, ENTEREffect depth CONTROL + EFFECT DEPTH, XXX, ENTERFine tune CONTROL + FINE TUNE, XXX, ENTERCoarse tune CONTROL + COARSE TUNE, XXX ENTERAll notes off CONTROL + MIDI CH.Reset all controller MIDI CH. + BEND SENSEGeneral MIDI reset BEND CURVE + MOD. DEPTHMIDI channel MIDI CH., XXX, ENTERControl change