E-22Removing1. Make sure that the Handheld Terminal is turned off.If the power is on, press the power key to turn it off.2. Turn the terminal over, turn the lock switch for the battery pack cover to the “FREE”position ( ), and then remove the battery pack cover ( ).3. Remove the battery pack by pulling up the removal tape as shown in the illustration( ).Important!When removing the battery pack, make sure you do not leave the HandheldTerminal without a battery pack for more than about 10 minutes. Doing so cancause data in the memory to be deleted.When removing the battery pack, be sure you carefully follow the properprocedure as explained in this guide.Never try to use other type of battery than the ones that are specified for thisproduct.When removing the battery pack, pull the removal tape straight up and removethe battery pack. Removing with excessive force can damage the battery pack.Before starting to use the Handheld Terminal, ensure that the battery pack coveris properly closed. If not, the power is not turned on or is turned off abruptlywhile it is in use.•••••