E-10 273A-E-012AThe following describes how to connect external equipment to the DigitalDrum’s PHONES/OUTPUT jack. See “MIDI” on page E-23 for informationabout connecting to another MIDI device.• Make sure you turn off all equipment before making any connections. Phones/Output JackBefore connecting headphones or other external equipment, be sure to firstturn down the volume settings of the digital drum and the connectedequipment. You can then adjust volume to the desired level after connec-tions are complete.Rear PanelLEFT RIGHTAUX IN or similar terminalof audio amplifierWhite Red PIN plugStandard plugPHONES/OUTPUT jackKeyboard amp,guitar amp,etc.123Connecting Headphones (1)Connecting headphones cuts off output from the digital drum’s built-inspeakers, so you can play even late at night without disturbing anyone.Connections Accessories and OptionsUse only the accessories and options specified for this digital drum. Use ofnon-authorized items creates the danger of fire, electrical shock, and per-sonal injury.Keyboard or guitar ampTo digital drum’sPHONES/OUTPUTjackStandard plugINPUTAudio Equipment (2)Connect the digital drum to an audio equipment using a commerciallyavailable connecting cord with a standard plug on one end and two PINplugs on the other end. In this configuration, you normally set the inputselector of the audio equipment to the terminal (usually marked AUX IN orsomething similar) where the cord from the digital drum is connected. Seethe user documentation that comes with your audio equipment for fulldetails.Musical Instrument Amplifier (3)Use a commercially available connecting cord to connect the digital drum toa musical instrument amplifier.❚ NOTE• Be sure to use a connecting cord that has standard plugs on the ends youconnect to the digital drum and amplifier.Connection Example02.10.31, 14:18Page 10