Song Memory FunctionE-36Song Memory FunctionYou can store up to two separate songs in song memory forlater playback. There are two methods you can use to recorda song: real-time recording where you record the notes as youplay them on the keyboard, and step recording where youinput chords and notes one-by-one.The song memory of this keyboard records and plays backnotes much like a standard tape recorder. There are twotracks, each of which can be recorded separately. Besidesnotes, each track can be assigned its own tone number.During playback you can adjust the tempo to change thespeed of playback. Track 1 is the basic track, which can be used to record AutoAccompaniment along with the melody. Track 2 can beused for melody only, and is for adding to what is recordedin Track 1. Note that each track is independent of the other. Thismeans that if you make a mistake while recording, youneed to re-record only the track where the mistake wasmade.Each press of the SONG MEMORY button cycles through thefunctions shown below.Press the LEFT/TRACK 1 button to select Track 1 and theRIGHT/TRACK 2 button to select Track 2. The letter “L” (left)appears on the display to indicate Track 1 is selected, and theletter “R” (right) appears to indicate Track 2 is selected.J PlaybackEach press of the LEFT/TRACK 1 and RIGHT/TRACK 2button while the keyboard is in playback standby (see “SongMemory Button Operation” above) toggles playback of thecorresponding track on and off. The letter that identifies atrack (L or R) appears on the display whenever playback ofthat track is turned on.1 MODE 2 SONG MEMORY 3 STEP4 Number buttons 5 INTRO 6 NORMAL/FILL-IN7 VAR/FILL-IN 8 SYNCHRO/ENDING 9 START/STOPbk STOP bl REW bm FFbn LEFT/TRACK 1 bo RIGHT/TRACK 2 bp [+]/[–]TracksSong Memory Button OperationSelecting a Track641A-E-038A