![Casio PCR-T265 Quick Start Manual Manual pdf 1 page image](https://manuals-archive2.s3.amazonaws.com/2862429/cc0317ff13170d82c8339c59fc8c32141f.jpg)
PCR-T265/T275 Quick start guideIMPORTANT: FOR PROGRAMMING ASSISTANCE PLEASE CALLTOLL FREE1-800-638-92281 Initialize Your Cash Register1. Un-pack your cash register, insert the PGM key and turn to the“OFF” position.2. Install the 58mm thermal paper roll as illustrated and close printercover.3. Plug the power cord of the ECR into an AC outlet.The initialization receipt is issued.Set the key switch to “REG” mode.2 Load the memory protection batteries1. Open the platen arm.2. Open the battery compartment cover.3. Load 3 new SUM-3 (“AA”) type batter-ies into the compartment. Be sure thatthe plus (+) and minus (-) ends ofeach battery are facing in the direc-tions indicated by the illustrationsinside the battery compartment.4. Slide the memory protection batterycompartment cover back into place.5. Replace the printer paper and printercover.Replace memory protection batteries at least once every year.User’s manualpage-9User’s manualpage-9User’s manualpage-11User’s manualpage-12,173 Setting the Time and DateTurn the key switch to “PGM” position.Setting the time.Example: 1:18PM = 1318ZkZCZySetting the date.Example: March 19, 2004 = 040319Zk?V?CZ>hy4 Setting Tax rates and statusTax ratesA) If you are in an area that uses a tax table for tax calculation,Press the { key and select 02 for tax table programming andfollow the instruction.CALREGOFFRFPGMXZPGMCALREGOFFRFPGMXZ00-00-2000 00:000001(C) 2003 by CASIOCOMPUTER CO.,LTD.All rights reserved.V.3965INI.••••••••••••••••1 00CALREGOFFRFPGMXZHour MinuteYear Month DayP appears in mode display• Enter 4 digits/ • 24 hour format(to end the time setting)P appears in mode display• Enter 6 digits/ • Enter last 2 digits for year set (2004 → 04)(to end the date setting)1. Issue “Help directory report”.2. Issue “Tax table index report”.3. Issue “State tax table code report”.{X{Select 02 (Tax table programming).Select your state.Follow these steps.?Z?Z{ENTER NUMBER THENPRESS KEY.01.HOW TO PROGRAMDATE AND TIME?02.HOW TO PROGRAMTAX TABLE?02.HOW TO PROGRAMTAX TABLE?•SELECT YOUR STATE ANDENTER NUMBER THENPRESS KEY.0101:ALABAMA0201:ALASKA0301:ARIZONA0401:ARKANSAS4901:5001:WISCONSIN5101:WYOMINGPLEASE SELECT YOURDISTRICT NUMBER FROMBELOW TABLE.1)TURN MODE KEY TO PGM.2)33)025SET TABLE14)XXXX KEY.SET TABLE2(IF NECESSARY)5)XXXX KEY.6)XXXX IS DISTRICT NUMBERALABAMA0101: 4% State0102: 4.5% State & Local0103: 5% State & Local0111: 9% State & LocalB) Programming Tax via “Flat Tax” procedure (No break point)1. Turn the PGM key to the PGM position.2. Enter the number 3, followed by the k key.3. Enter 0125 (for tax table 1) followed by the k key. (Enter 0225 fortax table 2)4. Enter your tax rate, followed by the p key. Example: For 6%enter the number 6. For 5.75%, enter 5.755. Enter 5002, followed by the p key.6. Press the k key to end tax programming.Example: Set Colorado state tax 5.25%C k?ZXB kB"MB pB??X pkTax statusYour cash register is pre-programmed below.a(Department-1): non taxs(Department-2): taxable 1If you need other than this setting for the Department and PLUs,please refer user’s manual page-17.5 Daily Management ReportRead report;Turn the key switch to the X position andpress pkey.Reset report;Turn the key switch to the Z position andpress p key.For more detailed report information, refer user’s manual.For more specific programming options and operating procedures,that will maximize the benefits of your new cash register, please referto you user’s manual or call 800/638-9228 for further assistance.Thank you for your Casio purchase.CALREGOFFRFPGMXZP appears in mode displayProgram code number for tax table 15.75% tax rate50 for round off and 02 for Add-on(to end the setting)COLORADO5.75%5.755002User’s manualpage-16, 35CALREGOFFRFPGMX ZppCALREGOFFRFPGMXZ