E-74Programming PLU functions in a lumpThis method programs functions of a PLU at one time.Step Operation1 Turn the Mode switch to PGM position and select [SystemSetting] then press F key.>▪▪▪▪▪>F2 Enter 3 and press o key to set the register in theprogramming mode.3o3 Enter four-digit PLU number then press PLU/S.DEPT key. 0014 PLU/S.DEPTFor example, to program PLU numberfourteen.4 Referring the table in the previous section, input 12- digitprogram code.BB▪▪▪▪▪BB[Program code (12 digits)]5 Press F key. F6 Repeat steps 3 through 5 if you wish to program functionsin another PLU.7 Press o key to complete the program. oAdvanced programmings and registrations
