A-6 417A-E-072AMIDI Data Formatn ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)RecognitionReceipt of this message immediately mutes all tones play-ing over the MIDI channels.Reset All Controller Formatn ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)RecognitionReceipt of the Reset All Controller message causes thefollowing controllers to be reset.Controller Name Reset ValueModulation Wheel vvH = 00HExpression Controller vvH = 7FHHold 1 vvH = 00HPortamento vvH = 00HSostenuto vvH = 00HSoft vvH = 00HNRPN msb = 7FH, lsb = 7FHRPN msb = 7FH, lsb = 7FHPitch Bend Change llH mmH = 00H 40HByte 1 Byte 2CnH ppHpp .... Program Number = 00H to 7FHSendProgram Change messages are sent when you select atone on the instrument.n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)ll ....... Pitch Bend Change LSB = 00H to 7FHmm .. Pitch Bend Change MSB = 00H to 7FHRecognition• The value llH mmH is 00H 00H at the lowest pitch,00H 40H at mid-pitch, and 7FH 7FH at the highestpitch.• You have to set both the LSB and MSB together to forma 14-bit value and make a Pitch Bend Change messagerecognized by the instrument.Channel Mode MessageAll Sound Off FormatPitch Bend Sensitivity RPN MSB = 00HRPN LSB = 00HData Entry MSB = mmHmm .. Pitch Bend Sensitivity = 00H to 18H (0 to 24 semi-tones)RecognitionThe data entry LSB is always ignored.Master Fine TuningRPN MSB = 00HRPN LSB = 01HData Entry MSB = mmHData Entry LSB = llHmm ll Master Fine Tuning = 00 00H to 40H 00H to 7FH7FH (-100 to 0 to +99.99 cents)Master Coarse TuningRPN MSB = 00HRPN LSB = 02HData Entry MSB = mmHmm .. Master Coarse Tuning = 28H to 40H to 58H (-24 to0 to +24 semitones)RecognitionThe data entry LSB is always ignored.RPN NullRPN MSB = 7FHRPN LSB = 7FHRecognitionOnce an RPN Null is sent, all received data entry MSBsand LSBs are ignored until another RPN message otherthan RPN Null or an NRPN message is received.Program ChangeFormatPitch Bend Change FormatByte 1 Byte 2 Byte 3EnH llH mmHByte 1 Byte 2 Byte 3BnH 78H 00HByte 1 Byte 2 Byte 3BnH 79H 00HPS3000_e_MIDI Data.p65 03.10.8, 2:22 PM6