Casio PX-320 Implementation Manual

Also see for Privia PX-320: User guide

Contents

Casio PX-320 Implementation Manual Manual pdf 20 page image

2011.2.3 Use of the Same DSP Line by Multiple PartsWhen multiple parts that select tones that use DSP and all of the following settings are the same, the same DSP line isassigned to all of the parts in order to maximize DSP line availability.• Tone Number• Part Volume• Part Pan• All DSP parametersAfter the same DSP line is assigned to different parts as described here, Part Volume, Pan, Reverb Send, Chorus Send,Acoustic Resonance Send, and all DSP parameter settings are common to all parts. Note that changing the settings on anypart will also affect all of the other parts that are sharing the DSP line. To assign the parts to a different DSP line, youneed to change one of the parameters listed above before selecting the tone.12 Channel AftertouchFormatSendThese messages are never sent.ReceiveReceipt of this message adds modulation to the voice that is sounding. The modulation effect differs according to the tonebeing used.13 Pitch BendFormatSendThese messages are never sent.ReceiveReceipt changes the pitch of the currently sounding note. The change depends on the pitch bend sensitivity configuredwith RPN.Message Format: DnH vvHn: MIDI Channel Numbervv: ValueMessage Format: EnH llH mmHn: MIDI Channel Numberll: Value LSBmm: Value MSB