5321.2 Patch Part Parameter ListThis list shows setting parameters that are specific for each part.System Exclusive FormatBasic Parameter ListNote 1:Number of the tone allocated to this part.Note 2:Sets the Normal, Drum and Drawbar Organ modes of the part play operation. For detailed operations, see "12.1 About thePart Mode".Tune / Mix parameterField Value01 SYSEX F002 MAN 4403 MOD 11,0204 dev Either 00 to 1F, or 7F05 act 00(IPC), 01(IPR)06 cat Patch = 0107 prm 00-7F08 ilen/dlen 0 / bit size - 109 ps LSB,MSB = 00, 0010 index Part Number - 1 (00-1F)11 data See the Parameter List12 sum None13 EOX F7ParamID Parameter bit Value Default Setting Value (Decimal)50 Tone Number (Note 1) 0E 000 000-FFF51 Part Octave Shift 03 2-6 4 -2 to 0 to +2 Oct52 Part Enable 01 0-1 1 0...Disable (Off)1...Enable (On)53 Part Mode (Note 2) 04 0-4 0 0...Normal1...Rhythm2...DrawbarParamID Parameter bit Value Default Setting Value (Decimal)54 Pitch Fine Tune 08 00-FF 80 -99 to 0 to +99cent55 Pitch Coarse Tune 07 28-58 40 -24 to 0 to +24 semi56 Volume 07 00-7F 7F 0-12757 Accomp Volume 07 00-FF 7F 0-12758 Bend Range 07 00-18 02 0-+2459 Pan 07 00-7F 40 -64 to 0 to +63
