E-12Playing with Different Tones1. Press the METRONOME button.• This starts the metronome.• The lamp above the SONG a button flash in timewith the metronome beat.2. To change the beat, hold down theFUNCTION button as you press one of theMETRONOME BEAT keys to select a beatsetting.• You can specify beats per measure value of 0, 2, 3, 4,5, or 6. Specifying 0 as the setting plays a straightclick, without any chime. This setting lets youpractice with a steady beat.3. While holding down the FUNCTION button,use the TEMPO keys to specify a tempovalue in the range of 20 to 255 beats perminute.• Each press of the + or – key raises or lowers thetempo value by 1.• You can use the value input keys (0 to 9) to enter aspecific three-digit. Be sure to input all three digits.Example: To enter “96”, press keys 0, 9, 6.4. Press the METRONOME button or SONGa button to turn off the metronome.NOTE• To return the tempo setting to the default tempo ofthe currently selected Music Library tune, press the+ and – keys at the same time in step 3. Pressing +and – while recording will return the tempo value to120.To adjust the metronome volumeYou can perform the following procedure at any time,regardless of whether or not the metronome issounding.1. While holding down the FUNCTION button,use the METRONOME VOLUME keys tospecify a volume value in the range of 0 to 42.• For details about using the keyboard keys forsettings, see “Keyboard Keys Used for ConfiguringSettings” on page E-21.• Each press of the T or S key raises or lowers themetronome volume value by 1.NOTE• To return to the initial default setting, press T andS at the same time.Using the Metronome