E-22Configuring Settings with the Keyboard■ Tones■ Song/MetronomeParameter ListParameter SettingsOperationType(page E-20)Description Remarks7 Hall simulator Off (OFF),N.Y. CLUB toBRITISH STADIUMDefault: STANDARDHALLA Specifies the Hall simulator ofnotes. (page E-11)8 Tone selection See page E-8.Default: GRANDPIANO (CONCERT)A Assigns a tone to the keyboard.(page E-8)9 Chorus Off (OFF), 1 to 4Default: 2D Controls the breadth of notes.(page E-11)bo Brilliance –3 to 0 to 3Default: 0B Specifies the brilliance of notes.Pressing [+] makes notes brighterand harder. Pressing [–] makesnotes mellower and softer.• To return the setting to its initial default(0), press [+] and [–] at the same time.bq Layer balance –24 to 0 to 24Default: 0B Specifies the volume balancebetween the main tone and thelayered tone. (page E-10)Parameter SettingsOperationType(page E-20)Description Remarks6 Song select(SONG SELECT)01 to 70Default: 01B (+/–)C (0 to 9)Selects a Music Library tune.(page E-15)• Always enter two-digits when using thenumber keys (0 to 9) to input a value.Example: To input 8, enter 0, 8 (leadingzero required).• This setting cannot be changed whilerecording.bm Song volume 00 to 42Default: 42B Sets the volume level of MusicLibrary playback.• This setting cannot be changed whilerecording.bk Metronome beat(METRONOMEBEAT)0, 2, 3, 4, 5, 6Default: 4A Specifies the metronome beat.(page E-12)• The metronome beat setting cannot bechanged while playback of a MusicLibrary tune is in progress.bn Metronomevolume00 to 42Default: 36B Specifies the metronome volume.(page E-12)