E-4Power OutletAfter you finish assembling the stand, turn on theDigital Piano. For details, see “Getting Ready” on pageE-39.1. Press the P (POWER) button to turn onDigital Piano power.• This causes the P ( POWER) button to light.• When you turn on the Digital Piano, it performs apower up operation in order to initialize its system.During system initialization the tone button lampscycle on and off in the sequence for about fiveseconds to let you know that system initialization isin progress.2. To turn off the Digital Piano, hold down theP (POWER) button until its light goes out.NOTE• Pressing the P (POWER) button to turn off poweractually puts the Digital Piano into a standby state.Minute amounts of current continue to flow withinthe Digital Piano in the standby state. If you do notplan to use the Digital Piano for a long time or ifthere is a lightning storm in your area, be sure tounplug the AC adaptor from the power outlet.Auto Power OffThis Digital Piano is designed to turn off automaticallyto avoid wasting power after no operation isperformed for a preset amount of time. The AutoPower Off trigger time is about four hours.• You also can use the procedure below to temporarilysuspend Auto Power Off.■ To disable Auto Power Off1. While the Digital Piano is turned on, press theP (POWER) button to turn it off.2. While holding down the FUNCTION button,press the P (POWER) button to turn on theDigital Piano.• Auto Power Off will be disabled at this time.NOTE• Turning off the Digital Piano after performing theabove steps will re-enable Auto Power Off.Turning Power On or Off12