E-7LocationAvoid the following locationsfor this product. Such locationscreate the risk of fire and elec-tric shock.• Areas subject to high humid-ity or large amounts of dust• In food preparation areas orother areas subject to oilsmoke• Near air conditioning equip-ment, on a heated carpet, inareas exposed to direct sun-light, inside of a vehicleparked in the sun, or any oth-er area that subjects the prod-uct to high temperaturesDisplay Screen• Never push on the displayscreen’s LCD panel or subjectit to strong impact. Doing socan cause the LCD panel’sglass to crack, creating the riskof personal injury.• Should the LCD panel evercrack or break, never touchthe liquid inside of the pan-el. LCD panel liquid cancause skin irritation.• Should LCD panel liquidever get inside your mouth,immediately wash out yourmouth with water and con-tact your physician.• Should LCD panel liquidever get into your eyes oronto your skin, rinse withclear water for at least 15minutes, and then contact aphysician.Sound VolumeDo not listen to music at veryloud volumes for long periods.High volume settings can dam-age your hearing.DCare of your keyboardAvoid heat, humidity or direct sunlight.Do not overexpose the instrument to direct sunlight, or place it near an air conditioner, or in anyextremely hot place.Do not use near a TV or radio.This instrument can cause video or audio interference with TV and radio reception. If this happens,move the instrument away from the TV or radio.Do not use lacquer, thinner or similar chemicals for cleaning.Clean the keyboard with a soft cloth dampened in a weak solution of water and a neutral detergent.Soak the cloth in the solution and squeeze until it is almost dry.Avoid use in areas subjected to temperature extremes.Extremely high or low temperature can cause figures on the LCD screen to become dim and difficult toread. This condition should correct itself when the keyboard is brought back to normal temperature.❚ NOTE ❚You may notice lines in the finish of the case of this keyboard. These lines are a result of the moldingprocess used to shape the plastic of the case. They are not cracks or breaks in the plastic, and are nocause for concern.SA65/67_E.p65 03.10.31, 5:31 PMPage 7 Adobe PageMaker 6.5J/PPC