Quick Setup GuideMaking a Sale2Helpline Monday to Friday8.30am to 4.30pm on01924 438238 (Option 2)Installing Paper1 Items can be sold either as a manual price entry or bypressing a pre-programmed item button.The cash register has two reporting modes, one forprinting out the information without clearing anyfigures, this is referred to as the X Mode.The second is for printing and clearing the figuresback to zero ready for the next day. This is referredto as the Z Mode.Example - End of Day ReportReporting3• Remove the printer cover andlift up both printer arms whereit says ‘PULL HERE UP’• Feed the paper underneath,and lower both the rolls intothe spaces provided.• Ensure the excess is broughtforward over each printer arm.• Close the left hand printer armuntil it locks steadily.• On the right hand side, removethe paper guide from the take-upreel and wind on the paper rollas shown.• Replace the paper guide on thetake-up reel and close the righthand printer arm until it lockssteadily. Slot the take-up reel inplace behind the printer.• Replace the printer cover andfeed the excess paper on theleft hand side through theprinter cover for receipts.Item ButtonsSE-C2000PGMRFOFFREGX ZX2/Z2Mode LockPGMRFOFFREGX ZX2/Z2Mode Lock• Insert the OP key(operator’s key) andturn to the REGposition.• Enter the price of thegoods without thedecimal point andpress one of theitem buttons.i.e. £1 equals 1 0 0• Alternatively press one ofthe pre-programmed buttons.• To enter another sale repeat as above by enteringa price then an item key.• Or, press another pre-programmed button on thekeyboard.• Press the SUBTOTALkey to show theamount due.• If you would like to calculate change (optional):-Enter the value of money given by the customer.I.e. £5.00 is entered as 5 0 0 and press theCA/AMT TEND key.• Or, press the CA/AMT TEND key directly(for non cash sales press CHEQ or CARD ).If a cash value was entered, the amount of changedue will be displayed on screen.• Insert the PGM key(program key) and turnto either the:X position to print without clearingOrZ position to print and clear sales.• Press the RC key todisplay the requiredreport on screen.• Press the CA/AMT TENDkey to print the report.• Turn the key to the REG position for normal use.PGMOPKUKUKUKUK