10Getting StartedETo install journal paperStep 1Remove the printer cover.Step 2Open the platen arm.Step 3Ensuring the paper is beingfed from the bottom of theroll, lower the roll into thespace behind the printer.Step 4Put the leading end of thepaper over the printer.Step 5Close the platen armslowly until it lockssteadily.Step 6Remove the paper guide ofthe take-up reel.Step 7Slide the leading end ofthe paper into the grooveon the spindle of the take-up reel and wind it ontothe reel two or three turns.Step 8Replace the paper guide ofthe take-up reel.Step 9Place the take-up reel intoplace behind the printer,above the roll paper.Step 10Press the f key to takeup any slack in the paper.During machineinstallation, press the fkey after power on.CompleteReplace the printer cover.
