CC-MC200W ENG 1Before using the computer, please thoroughly readthis manual and keep it for future reference.Please visit our website, where detailed instruc-tions with movies are available and the instructionmanual can be downloaded.Warning / Caution• Do not concentrate on the computer while riding. Ride safely!• Install the magnet, sensor, and bracket securely. Check these peri-odically.• If a child swallows a battery, consult a doctor immediately.• Do not leave the computer in direct sunlight for a long period oftime.• Do not disassemble the computer.• Do not drop the computer to avoid malfunction or damage.• When using the computer installed on the bracket, change theMODE by pressing on the four dots below the screen, or by press-ing on the SSE simultaneously, to start or stop the timer. Pressinghard on other areas may result in malfunction or damage to thecomputer.• Be sure to tighten the dial of the FlexTight™ bracket by hand.Tightening it strongly using a tool, etc. may damage the screwthread.• When cleaning the computer, bracket and sensor, do not use thin-ners, benzene, or alcohol.• Dispose of used batteries according to local regulations.• LCD screen may be distorted when viewed through polarized sun-glass lenses.Wireless SensorThe sensor was designed to receive signals within a maximum rangeof 70 cm, to reduce chance of interference. When adjusting the wire-less sensor, note the following:• Signals cannot be received if the distance between the sensor andthe computer is too large. The receiving distance may be short-ened due to low temperature and exhausted batteries.• Signals can be received only when the back of the computer isfacing the sensor.Interference may occur, resulting in incorrect data, if the computer is:• Near a TV, PC, radio, motor, or in a car or train.• Close to a railroad crossing, railway tracks, TV stations and/or ra-dar base.• Using with other wireless devices in close proximity.CATEYEMICRO WirelessCYCLOCOMPUTERCC-MC200W