Cateye Mity 3 User Manual

Cateye Mity 3 User Manual Manual pdf 1 page image

Precautions• Do not concentrate too much on the computer operationswhile riding.• Be sure to securely mount the magnet, sensor and bracketon your bicycle, and periodically check to insure they aremounted securely.• Used batteries must be disposed of properly and in accor-dance with all local regulations.• Do not leave the main unit exposed to direct sunlight. Neverdisassemble the computer.• To clean the computer, use mild soap and a soft cloth. Wipedry with a soft cloth. Paint thinner, benzine, alcohol or otherchemicals may damage the surface.SETTING UP1 Bracket 7 Magnet2 Wire 8 Rubber Pad3 Sensor 9 Nylon Tie S (3 pcs.)4 Sensor Band A (L&S) 0 Nylon Tie L (1 pcs.)5 Sensor Band B q Screw6 Attachment for AeroforkInstallationImportantAttach the sensor and the magnetproperly so that their positions meetthe following conditions A and B .Align the magnet’s 7 centerand the sensor’s 3 markingline while rotating the wheel.The clearance between the sen-sor 3 and the magnet 7 shouldbe less than 5mm.SensorAttach the sensor 3 temporarily tothe inside of the right front fork.• Applicable diameter of the sensorband A 4:(S) ------- 11-26ø front fork(L) ------- 21-36ø front fork• If the clearance between the sen-sor 3 and magnet 7 is wide,mount the sensor band 45 in theopposite way as shown.• In case of aerofork, apply the at-tachment 6.MagnetAttach the magnet 7 to the right side spoke of thefront wheel. Adjust the position of the sensor 3 andthe magnet 7 so that it meets the conditions A andB in the “Important” column.CAT EYE MITY 3CYCLOCOMPUTERCC-MT300NInstruction ManualMITY 3U.S. Pat. Nos. 4633216/4642606/5236759/5226340/5904442 and Pat. PendingDesign PatentedCopyright© 2001 CATEYE Co., Ltd.CCMMT3N-011119 Printed in Japan 066600095 a 2754834 53067373B12ABAcentermarking linefront forkless than 5mm1 24573869q01234spokeIn case of aerofork®

/ 4

Related manuals for Cateye CC-MT300