Catler ES 8010 Instructions For Use Manual

Contents

Catler ES 8010 Instructions For Use Manual Manual pdf 17 page image

HOW TO FROTH MILK FOR A CAPPUCCINO OR LATTÉ1717HOW TO FROTH MILK FOR A CAPPUCCINO OR LATTÉThe Espresso Machine comes complete witha Commercial Swivel Steam Wand and StainlessSteel Frothing Attachment. When using theFrothing Attachment a large amount of froth iseasily created.If less froth is required, remove the FrothingAttachment and steam the milk usingthe Steam Wand. To remove the FrothingAttachment, ensure it is cool then simply pulldown and remove. The Frothing Attachmentcan be stored in the Storage Tray inside themachine if not used regularly.To refit the Frothing Attachment ensure itis securely attached to the Steam Wand byinserting it, from either end opening, onto theWand and pushing firmly upwards onto therubber surround. Ensure the fine steam holeson either end of the Frothing Attachment areclean to achieve optimal frothing.• Turn the power button ‘On’• The first step in making a cappuccino orlatté is to make a short espresso. Refer to“Operating your Espresso Machine” onPage 12.• Then fill the stainless steel frothing jug 1/3full with cold fresh milk.• Turn the Selector Control to the ‘Steam’position. (Refer to information on Steamand Hot Water buttons on Page 19.) The‘Heating’ light will start to flash indicatingthat the Thermoblock Heating System isheating and preparing to create steam.WARNING:THE METAL PARTS OF THE FILTERHOLDER MIGHT STILL BE VERY HOT.COOL THESE PARTS IN COLD WATER.