NVP-903 Series User Manual274 Web Control [Decoder Mode]4.1 Log InNVP-903 supports PC web control via Ethernet port, it also supports PC/Smartphone/Padwireless web control via NVP-903 internal hotspot.4.1.1 Log in via Ethernet1) Prepare a computer with Ethernet port and Internet web browser.2) Connect your PC to the NVP-903 ETH port via Ethernet.3) Configure computer IP address, make sure that NVP-903 and the computer IP are in thesame network segment4) Input the device IP address in the web browser, it will displays the Log in page, as follows:(Default IP Address: 202.0.0.138)Figure4.1 Log in5) Type in the Account and Password to login.(Default Account: admin; Default Password: admin)4.1.2 Log in via Wi-Fi1) Prepare a PC/Pad/Smartphone with Wi-Fi function and Internet web browser.2) Search Wi-Fi SSID of NVP-903 internal hotspot(AP) and connect your PC/Pad/Smartphoneto it. (Default AP Password: 87654321)3) Input the device IP address in the web browser, it will displays the Log in page, as in Figure4.14) Type in the Account and Password to login.(Default Account: admin; Default Password: admin)27