D.A.S. DSP-226 User Manual
          | |
MATRIXIN AIN BGain Mute7PEQ Compressor delayOUT1OUT2OUT3OUT4OUT5OUT6Gain Mute7PEQ Phase Compressordelay X-over0¡~180¡Gain Mute7PEQ Compressor delayGain Mute7PEQ Phase Compressordelay X-over0¡~180¡Gain Mute7PEQ Phase Compressordelay X-over0¡~180¡Gain Mute7PEQ Phase Compressordelay X-over0¡~180¡Gain Mute7PEQ Phase Compressordelay X-over0¡~180¡Gain Mute7PEQ Phase Compressordelay X-over0¡~180¡8Signal Flow ChartSpecificationAbove specification is subject to change without prior notice.Input channel No. 2Output channel Number 6Input Impedance 10 kWOutput Impedance 50 WMax Input level 19dBuMax output level 19dBuSampling frequency 48kHzInput gain -40 +12dB,step 0.1dB~Output gain -40 +12dB,step 0.1dB~Input delay 1S, step 21uSOutput delay 1S, step 21uSInput PEQ number 7PEQOutput PEQ number 7PEQInput/output PEQ gain -30 +15dB,0.1dB/step~Input/output PEQ type PEQLow shelf 6dB/12dBHigh shelf 6dB/12dBInput/output PEQ Frequency 19.7 21.9kHz~Input/output PEQ bandwith 0.017 4.750 OCT~High/Low Pass Filter Frequency 19.7 21.9kHz~High/Low Pass Filter Type Bessel, Butterworth,Linkwitz-RileyHigh/Low Pass Filter Slope 12dB,24dB,36dB,48dBCompressor threshold -20 +20dBu,step 0.5dBu~Compressor ratio 1.2,1.5,2,3,4,6,10,20,40,128Compressor Attack time 1 100mS, step 1mS~Compressor release time 50 1000mS, step 50mS~Dynamic Range 116dB A WeightingFrequency Response 20Hz 20kHz( 0.5dB)~ ±CMRR >50dB(30Hz 20kHz)~CROSSTALK <-100dBTHD+N 0.003%(1kHz,0dBu)Max user program number 30Power 90-240VAC 50/60HzFuse T1AL 250VWeight 2.0kgSize 482*158*45mm |
Related manuals for D.A.S. DSP-226
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine