930 secPREPARING A BEVERAGEXLLUNGOXLXLXLSTOPXLXLXL14725836910 sec300 mlON123123Switch machine on. While machine is heatingup, power button starts blinking red. After ap-prox. 30 seconds, power button lights steadygreen and machine is ready.Use the lever to illuminate the bars in accord-ance with the number of bars shown on cap-sule, or set the bar display to your own taste.Choose XL beverage for an extra big cup.Take cup from drip tray. Open the lockinghandle.Adjust drip tray position according to thechosen beverage (see page 6-7). Place cup ondrip tray.Move the lever to the right for hot beveragesand to the left for cold beverages. Beveragepreparation starts. Bar display lights vanishprogressively. Machine stops preparation auto-matically. Extraction can be stopped manuallyby moving the lever back to the middle position.Pull out capsule holder and remove used cap-sule. Put used capsule in capsule bin.Open locking handle and pull out capsuleholder. Insert capsule in capsule holder andinsert it back in machine. Close locking handle.After finishing preparation, bar display flashesand power button blinks red for about 10 seconds.During this time do not open the lockinghandle!Rinse and dry capsule holder with water fromboth sides. Insert capsule holder into the ma-chine. Enjoy your beverage!